Punch Cutter

[mcdee]

I have a couple of Adorini double punch which to be honest I haven't really used so can't comment on but they are reasonably priced and you can also get a little leather pouch to store them in. This also offers 2 different sizes for the cut.

If you want something a bit fancier I have the ST Dupont Maxijet which I have used and can recommend. I also like that it retracts as that helps push the cap out after it's been used. This is only one size though but you can of course make multiple overlapping holes.

https://www.cgarsltd.co.uk/dupont-cigar-punch-cutter-maxijet-black-lacquer-chrome-p-13106.html

I have the Dupont one too. It's a very good punch.

[Stevieboy]

I have the Dupont one too. It's a very good punch.

You can't hide money 💰💰💰😄😄

[mcdee]

You can't hide money 💰💰💰😄😄

I had a few loyalty points to use with CGars so it didn't cost me too much.

[Sid.Stavros]

Gentlemen, for a cigar 50 to 52 ring a punch 10mm is good? Needs a bit more or less?
I am interested to buy one FARO - Black Punch Cigar Cutter (02100)

[SonicStag]

Gentlemen, for a cigar 50 to 52 ring a punch 10mm is good? Needs a bit more or less?
I am interested to buy one FARO - Black Punch Cigar Cutter (02100)

Works for me using Xikar but that punch looks just as good

[mcdee]

It could depend on the type of cigar. A lot of new world cigars I've tried have had a looser draw compared to most Cuban cigars. In those cases, more like 7mm would be better, in my opinion.

[OtELos]

This is what I use and can't complain at all






Sent from my iPhone using Tapatalk

[Snakes]

Gentlemen, for a cigar 50 to 52 ring a punch 10mm is good? Needs a bit more or less?
I am interested to buy one FARO - Black Punch Cigar Cutter (02100)

I'm more a v-cut person personally, but whenever I have used a punch cut I've never needed to create a particular big hole regardless of the cigar. What I would say if you're not sure is start with the smaller punch and if you feel it's necessary after trying the cigar, you can always use the same punch to make the hole a bit bigger.

[Sid.Stavros]

I'm more a v-cut person personally,

What I would say if you're not sure is start with the smaller punch and if you feel it's necessary after trying the cigar, you can always use the same punch to make the hole a bit bigger.

You are wetting the cigar before cut or not?